FEATURES

o    The TwinStomp BOOSTER provides TWO SWITCHABLE BOOST CHANNELS plus True By Pass.  The two potentiometer adjustable gain boost channels are designed to give x1 to x5 Voltage Gain (0dB - 15db) on Channel 1  and x2 to x13 Voltage Gain (6dB - 22.5dB) on Channel 2 as standard. Other boost levels can be provided to special order.

Set the Guitar/Amplifier to give a FULL CLEAN tone with the pedal in True By Pass and the two boost settings could be set to drive your Amp into a FAT CRUNCH on Channel 1 and a FULL SCREAMING LEAD on Channel 2.    This booster gives you that TRUE VINTAGE SOUND with ease.

o   TwinStomp BOOSTER uses an improved version of the Mosfet amplifier circuit popularised by Jack Orman.  This booster circuit gives a beautiful transparent sound which can push your amp into overdrive without colouring the sound.  It gives you a lot more of what you already have on your set up.

o    Two LEDs are provided which indicate which setting is in standby or active.

o    Very low battery drain.  An On-Off toggle switch is provided to allow the 9 Volt supply (Either battery or external supply) to be switched off without disconnecting input lead.  You can leave your rig connected without fear of draining your battery. 

o    Sounds great when operating on 9V battery.  9V input socket is supplied for those who prefer to provide power from other sources. 

o    Handwired providing extremely reliable interconnections.  Wiring is threaded through through the curcuit boards to ensure none of the solder joints can be stressed.

o    Purpose designed non-magnetic stainless steel enclosure, provides:

                    -    Extremely robust construction

                    -    Non slip feet which can be removed to allow permanent fixing to a pedal board

                    -    Unique battery holder - (UK Patent Application GB2449236) - battery can be replaced quickly without the removal of the base

                    -    Engineered and manufactured in England

o    Top quality components used throughout:

                    -    Two 3PDT Electro Harmonix style switches (procured in USA)

                    -    Alpha potentiometers (USA manufactured and procured)

                    -    Neutrik jacks (procured in USA)

                    -    Fairchild mosfet (manufactured in USA)

                    -    UL Toggle switch

                    -    Top quality close tolerance capacitors and resistors used throughout

o    Two purpose designed TwinStomp BOOSTER (copyright) printed circuit boards manufactured byISO9001:2000 registered firm in England. 

o    Supplied with Test Certificate giving full final test results.   Every pedal is permanently serial numbered and full records are maintained of build configuration and test results.   Circuits are fully tested twice. We are looking for clean unclipped signals from sine and square wave inputs.  Our quality assurance testing is conducted at 100hz, 1khz and 100khz for our standard pedal.

Our resident guitarist puts every pedal through its paces on a valve amplifier before signing the Test Certificate.

Photo: Neil Collins 2007